Russound CAS44 manual 12VDC Mute Trigger In/Trigger Out, 12VDC System Trigger Out

12VDC Mute Trigger In

When 12VDC is applied to the Mute In, the system will fully mute all zones in the system. The connections for the trigger are made using a two-conductor cable with 1/8” male mini-plug jacks. The tip is positive (+) and sleeve is nega- tive (-). This allows for the connection of an exter- nal paging or muting device. Note: The CAS44 will not accept a paging audio input; however, if used with an independent paging system with 12V trigger out, that can be used to trigger the mute.

INSTALLER

MAKING CONNECTIONS

12VDC Mute Trigger In/Trigger Out

12VDC System Trigger Out

Trigger Out 12VDC output is used for triggering an external amplifier or other component. The connections for the output are made using a two-conductor cable with 1/8” male mini-plug jacks at each end. The tip is positive (+) and sleeve is negative (-). The System Trigger Out supplies 12VDC when the first keypad is turned on. The 12 VDC is removed 5 minutes after the last keypad is turned off.

R235LS Amplifier

12VDC Power Supply

Doorbell Interface

21