Russound CAS44 manual Keypad Port Connection

INSTALLER

MAKING CONNECTIONS

Keypad Port Connection

The Keypad Ports are located on the back of the CAS44 in the top left of center. Connections at the Keypad Ports are made with RJ45 con- nectors using T568A CAT-5 wire configuration.

For a clean installation when wiring from a Keypad Port, use an RJ45 CAT-5 patch cable to connect from the keypad port to an RJ45 wall plate (optional). Using the same RJ45 T568A CAT-5 wiring configuration, use CAT-5 from the RJ45 wall plate to the keypad.

If using more than one keypad in a zone, use an SA-ZX3 System Keypad Splitter (optional). The SA-ZX3 supports up to three keypads per zone and connects directly to the Keypad Port for that zone. The CAT-5 for the keypads is run to a wall plate, with RJ45 CAT-5 patch cables between the wall plate and the SA-ZX3. Always use the RJ45 T568A CAT-5 wire configuration when connecting keypads.

CAT-5 Cable

CAT-5 to Keypad 110 punchdown (KP4, KPL)

1201A/1A Power Supply

CAT-5 Cable

SA-ZX3

PM Mod 3D with RJ-45 CAT-5 Cable

17