INSTALLER
GETTING STARTED
Unpacking the System Components
•Keep the original carton and packing materials for future shipment or storage.
•Check for any visible signs of damage. If you encounter any concealed damage, con- sult your Russound dealer before proceeding to install the unit.
•Retain the sales receipt as it establishes the duration of the limited warranty and provides information for insurance purposes.
CAS44 System Components:
•1 (one) CAS44 Controller/Amplifier
•4 (four) KP4 or KPL System Control Keypads
•1 (one)
•2 (two) 1584.1 Dual Micro Emitters
•1 (one) IR Link Cable
Tools needed for installation:
•Drill with a 1/2” x 6” drill bit
•Keyhole saw
•Flat head screwdriver (medium size)
•Phillips Screwdriver (cordless recommended)
•110 punchdown tool (included)
•Modular
•Pair of diagonal cutters or wire strippers
•Stud finder
•Steel wire fish tape
•Cable staples
•
System Installation Considerations There are several factors to consider before installing the Russound CAS44 system:
•What are the intended listening zones?
•What system options and accessories might be required for features such as local sources, etc.?
•From where in each zone will the user prefer to control the system? Where will the keypads be located? Where will the speakers be located?
•Where will the source equipment be located? The CAS44 must have proper ventilation above and below for air circulation and heat dissipation. A
Connection Tips
•It is recommended that the CAS44 and the source equipment be plugged into a dedicated
•Disconnect all live power cords before making connections to the controller.
•Verify that all connections and polarity are correct.
•Keep all power cords away from all signal cables to prevent humming from induced noise.
•Choose reliable signal cables/patch cords.
•Label all wires with room location at both ends of the wire.
12
