Saeco Coffee Makers HD8966 manual Preparing for USE, Machine Packaging, Machine Installation

10ENGLISH

PREPARING FOR USE

Machine Packaging

The original packaging has been designed and constructed to protect the machine during transport. We recommend keeping the packaging material for possible future transport.

Machine Installation

1Remove the drip tray with grill and the carafe from the packaging.

2Remove the machine from the packaging.

3 For best use, it is recommended to:

• Choose a safe, level surface, where there will be no danger of over- turning the machine or being injured.

• Choose a location that is sufficiently well-lit, clean and near an eas- ily reachable socket.

• Allow for a minimum distance from the sides of the machine as shown in the illustration.

4 Insert the drip tray (external) with grill into the machine. Make sure it is correctly placed.

Note:

The drip tray collects the water that comes out of the dispensing spout during each rinse/self-cleaning cycle, as well as coffee that might be spilled during beverage brewing. Empty and wash the drip tray daily and each time the full drip tray indicator is raised.

Caution:

NEVER remove the drip tray when the machine has just been turned on. Wait a couple of minutes for the machine to carry out a rinse/self- cleaning cycle.