USER’S MANUAL
Caution
Please read the following precautions carefully before installing the product and follow the directions for installation.
Don’t install the DVR in a location which has high levels of dust, moisture, smoke or other contaminants.
Avoid locations which have high or fluctuating temperatures, and avoid direct sunlight. Do not install the product where the temperature is ever above 104°F/40°C, or below freezing 32°F/0°C).
Do not install the product where it is exposed to direct sunlight or close to a heating device.
Don’t install the DVR near any magnetic fields (such as microwaves).
Don’t place objects on top of the DVR. Ensure that the ventilation holes are not obstructed.
Don’t access the rear panel or remove the DVR casing unless the power is disconnected.
Make sure you have enough room to connect all the cables and accessories before installing the DVR.
Ensure the location you install the DVR to is level, well ventilated and is not subject to vibrations of any kind. Firmly fix the DVR in place on a stable, flat and stationary surface in a well ventilated area.
Try not to install the DVR around other electrical devices – they can sometimes interfere with one another.
Only qualified technicians should ever disassemble the DVR.
Do not put heavy objects on top of the product.
The power outlet must be grounded.
If you hear any strange noises or smell any new odors around DVR, stop using the DVR immediately. Disconnect the power supply and call the technician who installed it or technical support for help.
Do not move or flip the DVR over while it’s turned on. Damage could be done to the spinning hard disks.
Periodically check that the DVR is functioning properly.
When replacing the battery, always replace with the same type of battery as the one provided. When disposing the battery, follow the direction of the manufacturer.
We are not responsible for the problem from misuse by the user.
H.264 REAL TIME DVR
3
