Adjusting Your FPD

Table 1. Menu Adjustments (Continued )

 

 

 

 

 

 

 

 

 

Icon

Settings and

Description

Sub-menus

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset:

Select this icon to return to the factory preset values

 

 

 

Geometry

for the selected group of functions. Resetting the

 

 

 

 

 

 

Color

Geometry settings changes the Position settings,

 

 

 

 

Image Lock settings and changes the Image Size to

 

 

 

 

Expand 2.

 

 

 

 

Resetting the Color settings changes the colors back

 

 

 

 

to their original factory settings.

 

 

 

 

 

 

 

 

 

 

 

 

Language:

Select one of the six languages to use for the OSM.

 

 

 

English

The language chosen affects only the language of the

 

 

 

Deutsch

OSM, but does not alter its function. Neither does it

 

 

 

Español

have any effect on any software running on the com-

 

 

 

Français

 

 

 

puter.

 

 

 

Italiano

 

 

 

 

 

 

 

 

 

 

 

Svenska

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu Display

The OSM stays active for as long as it is in use. The

 

 

 

Time:

Menu Display Time sets the length of time the OSM

 

 

 

5 Seconds

will remain active after the last time you pushed a

 

 

 

10 Seconds

button. The default time is 10 seconds.

 

 

 

20 Seconds

 

 

 

 

 

 

 

 

 

 

 

200 Seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu Position:

Select this icon to change the position of the OSM on

 

 

 

Vertical

the screen. The “–” (

 

) and “+” (

 

) buttons move

 

 

 

 

 

 

 

 

 

 

 

 

 

Horizontal

the OSM. Select the Horizontal function to move the

 

 

 

 

OSM to the left or right; select the Vertical function to

 

 

 

 

move the OSM up or down.

 

 

 

 

 

 

 

 

 

 

 

 

Image Size:

If your computer or video board supplies a signal rate

 

 

 

Normal

and addressability lower than 1280 x 1024, this FPD

 

 

 

Expanded 1

provides a scaling processor that can expand the

 

 

 

Expanded 2

addressability up to 1280 x 1024. Select the Normal

 

 

 

 

 

 

 

 

setting to use the normal size viewing area for the cur-

 

 

 

 

rent signal. Select Expanded 1 to expand the viewing

 

 

 

 

area to the full width of the FPD screen. Select

 

 

 

 

Expanded 2 to extend the viewing area both horizon-

 

 

 

 

tally and vertically to the full size of the FPD screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

13

Italiano Portuguese Deutsch Español Français English

Page 15
Image 15
Samsung DV18MSTAN, 800TFT manual Expand, To their original factory settings, Puter, Button. The default time is 10 seconds