Samsung 700TSN-2, 820TSN-2 user manual MagicInfo Available Modes, ID Setup, ID Input

Adjusting the LCD Display

→ , → [0~9]

•ID Setup

Assigns distinctive IDs to the SET.

•ID Input

Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.

MagicInfo

Available Modes

• PC / DVI

• AV

• Component

• HDMI

• MagicInfo

Note

•The remote control can be used to select MagicInfo. However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully.

•For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the LCD Display turns on.

•Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop. If you do unplug the cable, restart the system.

•Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop.

•To access other sources, press the SOURCE button in MagicInfo.

•The preset password for the LCD Display is "000000".

•The server program's Power-On option works only if the LCD Display's power is com- pletely shut off.

Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display.

88