PREPARING FOR INSTALLATION
Accessories
The following accessories are supplied with the air conditioner:
Note The number of each accessory is indicated in parentheses.
Accessories in the Indoor Unit Case
Installation Plate (1) |
| Remote Control (1) |
| Remote Control (1) | ||
|
| AQR/U |
| AQE | ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accessories in the Outdoor Unit Case
Drain Plug (1) | Rubber Leg (4) | |
Assembly Cable (1) |
|
|
09/12/18/24 |
|
|
Batteries for
Remote Control (2)
User’s Manual (1)
Installation Manual (1)
Note The flare nuts are attached to the end of each pipe of an evaporator or a service port. Use the nuts when connecting the pipes.
The
The drain plug and rubber leg are only included when the air conditioner is supplied without the assembly pipe as seen in the picture below.
The following connection accessories are optional. If they are not supplied, you should obtain them before installing the air conditioner.
Insulated |
| Insulated |
| Insulated |
| Insulated |
Assembly Pipe, |
| Assembly Pipe, |
| Assembly Pipe, |
| Assembly Pipe, |
Ø6.35mm x 5m (1) |
| Ø9.52mm x 5m (1) |
| Ø12.70mm x 5m (1) |
| Ø15.88mm x 5m (1) |
|
| 09 |
| 12/18 |
| 24 |
|
|
|
|
|
|
|
PE T3 Foam Tube |
| Vinyl Tapes (2) | ||
Insulation (1) |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drain Plug (1)
Rubber Legs (4) Pipe Clamps A (3) Pipe Clamps B (3) Cement Nails (6)
Ø4 x 25
Tapped Screws (6)
Drain Hose,
length 2m (1)
Putty 100g (1)
Note If these accessories are supplied, they will be in the accessory box.
Tools required for installation
General Tools
Vacuum Pump(Backward flowing prevention) | Manifold Gauge | Stud Finder | |
Torque Wrench | Pipe Cutter | Reamer | Pipe Bender |
Spirit Level | Screw Driver | Spanner | Drill |
L Wrench | Measuring Tape |
|
|
Tools for test operations |
|
|
|
Thermometer | Resistance Meter | Electroscope |
|
_IM_30271A_E_11.07.09.indd 8