Samsung ASV24PUQNXEA, ASV13PSPNXEA manual Checking the remote controller, Remote controller buttons

Checking the remote controller

•Point the remote controller towards the remote controller receiver of the indoor unit.

•When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator() appears on the remote controller display.

Remote controller buttons

	Power
	Mode
SPi	Set one of the 5 operating modes
SPi : Set the SPi function on/off	(see pages 10~11 for instructions).
Smart Saver	Quiet
	Reduce noise generated from an indoor unit
Less energy usage makes your space	during operation.
cool between the temperature range	Air swing
of 24°C~30°C.
Turbo	automatically up and down.
	Fan
Operate in auto fan speed to
cool quickly.
Temp + -	such as Auto/Low/Medium/High.
Increase/Decrease the temperature by 1˚C.
	d’light Cool <Option>
Auto Clean	Set the d’light Cool function on/off
Auto clean function – Dry inside of the indoor	Set the	mode on.
unit to get rid of odor.	Filter Reset	(2nd F) <Option>
On Timer	This Button doesn’t have any function.
	However Beep sound will come out.
Set the On Timer on.
	(2nd F) <Option>
	To silence the beep sound when pressing
Use 2nd function	the button.	(2nd F)
Temp/Humi	Set/Cancel
<Option>
	Set/Cancel the timer/		mode.

• When you press [2ndF] button, the indicator will be displayed on the remote controller and you can change the functions on the remote controller as listed below.

Filter Reset,  

If you select the function under the button while the function of the button is switched by 2ndF button, the 2ndF function is canceled.

•Make sure that the water does not get to the remote controller.

	• The d'light Cool function is not available for this model.
8	If you press the d'light Cool button in the cooling mode, air conditioner will be operated as auto mode.