![](/images/new-backgrounds/1278708/27870829x1.webp)
I N S T A L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.
2
Connect the other end of this cable to the VHF/UHF antenna
terminal on the back of the TV.
▼ | This terminal might be labeled |
“ANT OUT,” “VHF OUT,” or simply, “OUT.”
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a
1
Find and disconnect the cable that is connected to the ANTENNA IN terminal on your
cable box.
▼ | This terminal might be labeled |
“ANT IN,” “VHF IN,” or simply, “IN.”
2
Connect this cable to a two-way splitter.
3
Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.
CHAPTER TWO: INSTALLATION 2.3