Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H

I N S T A L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks(AV1~AV3) on the TV.

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must con- nect two cables.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack(AV1~AV3) on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

CHAPTER TWO: INSTALLATION 2.5

Image 17

Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H manual Connecting a VCR

Contents

Owner’s Instructions As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Operation InstallationYour New TV Troubleshooting Special Features Chapter One List of Features Familiarizing Yourself with The TV Audio Input jacks Side Panel Jacks´ Video Input jack Super Video Input jack AUDIO-VIDEO Monitor Output jacks Rear Panel JacksComponent 2 Input jacks 480i/480p/1080i ´,¨,ˆVIDEO Input jack Power Remote Control´ Number buttons +100 ˘ Display Remote Control ¯ Reset¿ Sleep ¸ VCR Controls Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All Channels Install AT I O N Unplug the cable or antenna from the back of the TV Connecting a VCR Connecting an S-VHS VCR Make sure the jacks you are using are underneath the number Connecting a Second VCR to Record from the TV Connecting a DVD Player 480i/480p Connecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play Feature If you want to reset this feature Viewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-source Storing Channels in Memory Automatic Method Press the VOL+ button Adding and Erasing Channels Manual Method Changing Channels Adjusting the Volume Labeling the Channels Setting the Clock Press the Menu button to display menu Customizing the Picture Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Press the CH button to select TV/AV Viewing an External Signal Source Setting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote Control DVD Codes VCR Codes Codes Setting Up Your Remote Control to Operate Your Cable BoxCable Box Fine Tuning Channels Alternate between On and Off LNA Low Noise Amplifier Tilt DNIeTM Digital Natural Image engine Digital Noise Reduction CL32Z7H/CL32Z6H Changing the Screen Size Press the CH button to select Color Tone Changing the Color Tone Freezing the Picture Using the R.Surf Feature Setting the On/Off Timer Press the VOL + button to select On/Off Setting the Sleep Timer Choosing a Multi-Channel Sound MTS Soundtrack Just press the MTS button on the remote control BBE BBE Viewing Closed Captions Activating Picture-in-Picture Viewing Picture-in-Picture Press the VOL + button to select PIP On Selecting a Signal Source External A/V for PIP Changing the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Viewing the Demonstration Chapter Five Identifying Problems Specifications Cleaning and Maintaining Your TVUsing Your TV in Another Country M O M O Appendix A.4