Y O U R N E W T V
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.
You can also use your remote control to operate your VCR and cable box. See page 4.1 for details.
ŒPower
Turns the TV on and off.
´Number buttons
Press to select channels directly on the TV.
+100
Press to select channels over 100. For example, to select
channel 121, press “+100,” then press “2” and “1.”
ˇTV/Component
Press to switch the TV, COMPO- NENT1 or 2mode.
¨CH▲ and CH▼
(Channel Up/Down)
Press CH▲ or CH▼ to change channels (Also used to highlight selections on the
VOL -, VOL +
Press to increase or decrease the volume (Also used to make selec- tions on the
ˆMute
Press to temporarily cut off the sound.
ØEQ.
Press to select Equalizer menu directly.
∏P.size
Press to change the screen size. Your choices are Normal, Zoom1, Zoom2 or Wide screen.
”P.Mode
Adjust the TV picture by selecting one of the preset factory settings (or select your personal, cus- tomized picture settings).
’S.Mode
Adjust the TV sound by selecting one of the preset factory settings (or select your personal, cus- tomized sound settings).
˝MODE
Selects a target device to be con- trolled by the Samsung remote control (i.e., TV, VCR, Cable box, or DVD).
ÔPre-CH
Tunes to the previous channel.
TV/Video
Press to display all of the available video sources (i.e., AV1, AV2, AV3,
ÒMenu
Displays the main
ÚStill(Main)
Press to stop the action during a particular scene. Press again to resume normal video.
Note: The still function doesn’t operate in Component 1, 2 mode.
ÆPIP
Press this button to control the PIP window.
ıBBE
A Sound related function that operates the treble, bass, and boost the function based to 650dB standards and reverses the phase to produce replicated sound that is close to the original sound.
˜MTS (Multichannel Television Stereo)
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
CHAPTER ONE: YOUR NEW TV 1.5
