![](/images/new-backgrounds/1278708/27870861x1.webp)
O P E R AT I O N
Labeling the Channels
Use this feature to assign an
1
Press the CH ▲ or CH ▼ button to tune to the channel that will be labeled.
2
Press the MENU button to dis- play the menu, then press the CH ▼ button to select “Channel”.
Press the VOL + button.
3
Press the CH ▼ button to select “Labeling”.
Press the VOL + button to begin labeling. The
(Each label has four fields. See top paragraph.)
4
Press the CH ▲ or CH ▼ button to select a letter, a number, “*”, or a blank. (Pressing the CH ▲ button results in this sequence: A,B,...Z,*, blank,0,1,...9).
5
Press the VOL+ button to switch to the next field, which will be highlighted. Select a second letter or digit using the CH ▲ and CH ▼ buttons, as above. Repeat the process to select the last two digits.
Press the MENU button to set the label and clear the menus from the screen.
▼ | Note: You cannot select |
“Labeling” in the A/V mode.
CHAPTER THREE: TV OPERATION 3.9