![](/images/new-backgrounds/1278708/27870837x1.webp)
I N S T A L L AT I O N
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:
1
Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR.
(The VCR input jacks might be either on the front or on back of the VCR.)
2
Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR.
Refer to your VCR’s instructions for more information about how to record using this kind of connection.
Connecting a DVD Player (480i/480p)
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio cables between the
2
Connect a video cable between the COMPO- NENT 1 INPUT (Y/V, PB, PR) or COMPONENT 2 INPUT (Y/V, PB, PR)jacks on the TV and the DVD- OUT (Y, PB, PR) jacks on the DVD player.
Note: For an explanation of Component video, see your DVD player's owner's manual.
CHAPTER TWO: INSTALLATION 2.7