Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H

O P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~4 on previous page.

Press the MENU button to display the menu.

Press the CH ▼ button to select “Channel”, then press the VOL + button.

2

Press the CH ▼ button to select “Auto program”.

3

Press the VOL + button. The TV will begin memorizing all of the available channels.

After all the available channels are stored, the Auto program menu reap- pears. Press the MENU button to exit.

▼	The TV automatically cycles

through all of the available channels and stores them in memory. This takes about one to two minutes.

Press MENU at any time to interrupt the memorization process and return to the Channel menu.

3.6 CHAPTER THREE: TV OPERATION

Image 28

Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H manual Storing Channels in Memory Automatic Method

Contents

Owner’s Instructions As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Your New TV InstallationOperation Special Features Troubleshooting List of Features Chapter One Familiarizing Yourself with The TV Side Panel Jacks Audio Input jacks´ Video Input jack Super Video Input jack Rear Panel Jacks AUDIO-VIDEO Monitor Output jacksComponent 2 Input jacks 480i/480p/1080i ´,¨,ˆVIDEO Input jack Remote Control Power´ Number buttons +100 Remote Control ¯ Reset ˘ Display¿ Sleep ¸ VCR Controls Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin Leads Connecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some Channels Install AT I O N Connecting a VCR Unplug the cable or antenna from the back of the TV Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR Connecting a DVD Player 480i/480p Connecting a Second VCR to Record from the TV Connecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Turning the TV On and Off If you want to reset this feature Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Selecting the Video Signal-source Memorizing the Channels Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Press the VOL+ button Adjusting the Volume Changing Channels Labeling the Channels Setting the Clock Customizing the Picture Press the Menu button to display menu Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Viewing an External Signal Source Press the CH button to select TV/AV Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVD VCR Codes DVD Codes Cable Box Setting Up Your Remote Control to Operate Your Cable BoxCodes Fine Tuning Channels LNA Low Noise Amplifier Alternate between On and Off Tilt DNIeTM Digital Natural Image engine Digital Noise Reduction Changing the Screen Size CL32Z7H/CL32Z6H Changing the Color Tone Press the CH button to select Color Tone Using the R.Surf Feature Freezing the Picture Setting the On/Off Timer Setting the Sleep Timer Press the VOL + button to select On/Off Just press the MTS button on the remote control Choosing a Multi-Channel Sound MTS Soundtrack BBE BBE Viewing Closed Captions Viewing Picture-in-Picture Activating Picture-in-Picture Selecting a Signal Source External A/V for PIP Press the VOL + button to select PIP On Changing the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Viewing the Demonstration Identifying Problems Chapter Five Using Your TV in Another Country Cleaning and Maintaining Your TVSpecifications M O M O Appendix A.4