Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH ▲ and CH ▼ buttons to scan through the channels. This eliminates the need to change chan- nels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and delet- ing channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the MENU button to display the menu.

Press the CH ▼ button to select “Channel”, then press the VOL + button

2

Repeatedly press the VOL + button to cycle through these choices: ANT (antenna) STD, HRC or IRC (all cable TV).

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next page).

CHAPTER THREE: TV OPERATION 3.5

Image 27

Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H Memorizing the Channels, Selecting the Video Signal-source

Contents

Owner’s Instructions As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Installation Your New TVOperation Troubleshooting Special Features Chapter One List of Features Familiarizing Yourself with The TV Super Video Input jack Side Panel JacksAudio Input jacks ´ Video Input jack ´,¨,ˆVIDEO Input jack Rear Panel JacksAUDIO-VIDEO Monitor Output jacks Component 2 Input jacks 480i/480p/1080i +100 Remote ControlPower ´ Number buttons ¸ VCR Controls Remote Control ¯ Reset˘ Display ¿ Sleep Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Cable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF Antennas Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All Channels Install AT I O N Unplug the cable or antenna from the back of the TV Connecting a VCR Connecting an S-VHS VCR Make sure the jacks you are using are underneath the number Connecting a Second VCR to Record from the TV Connecting a DVD Player 480i/480p Connecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play Feature If you want to reset this feature Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-source Storing Channels in Memory Automatic Method Press the VOL+ button Adding and Erasing Channels Manual Method Changing Channels Adjusting the Volume Labeling the Channels Setting the Clock Press the Menu button to display menu Customizing the Picture Using Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Press the CH button to select TV/AV Viewing an External Signal Source Setting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote Control DVD Codes VCR Codes Setting Up Your Remote Control to Operate Your Cable Box Cable BoxCodes Fine Tuning Channels Alternate between On and Off LNA Low Noise Amplifier Tilt DNIeTM Digital Natural Image engine Digital Noise Reduction CL32Z7H/CL32Z6H Changing the Screen Size Press the CH button to select Color Tone Changing the Color Tone Freezing the Picture Using the R.Surf Feature Setting the On/Off Timer Press the VOL + button to select On/Off Setting the Sleep Timer Choosing a Multi-Channel Sound MTS Soundtrack Just press the MTS button on the remote control BBE BBE Viewing Closed Captions Activating Picture-in-Picture Viewing Picture-in-Picture Press the VOL + button to select PIP On Selecting a Signal Source External A/V for PIP Changing the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Viewing the Demonstration Chapter Five Identifying Problems Cleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications M O M O Appendix A.4