Cameras sensitivity is automatically | Samsung Digimax V4000

Shooting

INFORMATION

Continuous and AEB shots cannot be selected in the TIFF image quality format.

To take the continuous shot, the number of available shots must be more than 2 because the minimum number of the continuous shots are 2. To take the AEB shots, the number of available shots must be more than 3 because of the same reason.

Camera shake can be a problem when using the AEB shooting mode and it takes time to store the AEB image to the memory. We recommend using a tripod.

ISO

You can select the camera’s sensitivity to light by selecting the ISO sub menu. The speed or specific light-sensitivity of a camera is rated by ISO numbers.

1.Rotate the mode dial to the RECORDING mode and press the MENU button.

2.Press the DOWN button and the cursor will be shifted to the main menu.

3.Select the [SHOOTING] menu by pressing the UP/DOWN button.

4.Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed.

5.Select the [ISO] menu by pressing the UP/DOWN button.

6. Press the RIGHT button and the cursor will shift to the [ISO] sub menu.		PROG	SETUP			MyCAM
7. Select the desired sub menu by pressing the UP/DOWN button.
		ISO				AUTO
- AUTO	: The camera's sensitivity is automatically	ISO				AUTO
- AUTO	: The camera's sensitivity is automatically	W.B				100
	changed by variables such as lighting value or	W.B				100
	changed by variables such as lighting value or	EFFECT				200
	subject brightness.	SHARP				400
- 100/ 200/ 400 : In the same lighting conditions, the higher the
		BACK:				SET:OK
	ISO value is, the faster the shutter speed will
	ISO value is, the faster the shutter speed will
	be. However, the images can be saturated in very bright conditions.

8.Press the OK button to confirm the setting.

Press the menu button twice and the menu display will disappear. Take a picture.

INFORMATION

The higher the number, the more sensitive it is to light. As with film, the higher speeds usually induce more electronic noise so the image gets grainier.

When the power is turned off, the changed setting value returns to the initial value. [AUTO] is not applied to A/S/M mode.

RECORDING

55

Image 55

Samsung Digimax V4000 manual Cameras sensitivity is automatically, Subject brightness

Contents

English Instructions Contents Setting up the application software Connecting to an external monitorSetting up the play back function Before contacting a service center Getting to know your camera About the symbols About the symbols People or animals. Positioning the flash too Do not use the flash in close proximity toClose to your subject’s eyes, may cause Page An FCC warning Special features Editing images on a PC. p.120 This digital camera can be used for Recording a movie clip refer to Manufacturers contents Front & Top Identification of featuresBack & Bottom 37/68 Button p.40/68 SideFunction button Voice memo / UP button 35/67 Portrait mode Mode dial MySET Movie Clip Using the batteries Connecting to PowerInsert the batteries taking note of the polarity + Non rechargeable batteries Using the AC power adapter Removing the memory card Inserting the memory card Large Easy modeSDSecure Digital memory card Super fine Fine Normal Instructions on how to use the memory card Selecting the date and time UP or Down button Press the OK button to confirm the setting Language Recording mode LCD monitor indicator 250 F5.6 Manner mode Starting recording modePress the shutter button to capture an image Long as the available recording time allows. The recording Press the shutter button to take a movie clipFile type AVI Press the shutter button to record audio Recording LCD button My SET mode will change the display as shown belowShutter button Zoom Tele Wide / Tele button Zoom Wide M, MySET UP/ Voice memo button Used for macro shots 0.3 m ~ 0.8m Macro / Super Macro buttonUsed for macro shots 0.06m ~ 0.3m Flash button Macro mode setting Slow synchro Flash mode indicator IndicatorFlash button Controlled, according to the prevailing conditions Button SELF-TIMER / Remote button Off Remote Self-timer/ remote mode settingOff 10s self-timer Remote Off 2s self-timer 10s self-timer Remote MENU/ OK button SELF-TIMER/ Remote button Part of the MF bar Photography range MF button +/- button Shutter priority / manual mode Using the LCD monitor to adjust the camera CLIP, MySET 1/2/3 Main menu Sub menuSRGB Shift the tab cursor by pressing the LEFT/ Right button How to use the menuSelect a menu by pressing the UP/ Down button Size Super fine Quality Press the Down button and the cursor will be shifted to You can select the aperture value in this modeYou can select the shutter speed in this mode Menu buttonPage Multi pattern metering MeteringSpot metering Shooting Subject brightness Cameras sensitivity is automatically White Balance Exact image color EffectNo effect is added to the image Converts the image to black and white Will have a soft appearance SharpnessAppearance Press the menu button twice and the menu display will My SET mode menuMode Button Change Play mode Starting the play mode Starting the play mode 2004/04/01 Recording date Image sizeF2.8 Aperture value Shutter speed 100 ISO sensitivity Thumbnail & Wide / Tele & Trimming button Information button Selecting no an initial image will be displayed Thumbnail / Enlargement / Trimming button UP / Voice memo button Menu / OK button Down / Left / Right button Delete button Selected image plays back as a single image display Play & Pause button 00 ~ 30 Prints Setting up the play back function using the LCD monitorOFF, 01 ~ 10 SEC Default OFF 1024 x 640 x 320 x Select the Slide menu by pressing the UP/DOWN button Slide showAutomatically Protect Resize Selecting YES Delete allDeleted and a no IMAGE! message will Embed a print quantity by pressing the LEFT/ Right button Dpof StandardMenu page will be displayed Dpof Index Dpof Cancel Default 3 MIN Setup menu1200 AM/PM Select the File menu by pressing the UP/DOWN button File Power off Select the Language menu by pressing the UP/DOWN button Menu display will disappear After formatting in play modeFormat Selecting no Image will be displayed on the LCD Format UP/ Down button Date set Time set Date type Imprint Sound LCD brightness Video Connecting to an external monitor Selecting on Using the DEL.ANSWER menuQuick view UP/DOWN button Selecting OFF Start up image MyCAM menu Shutter sound Start up sound Size List of camera function Flash Imprint Starting PC mode Cut Select an image and press the right mouse button Important notes Extremes in temperature may cause problems Format the memory card p.83 There is low battery capacity Insert fresh batteriesTurn it on again Insert the memory card again Before contacting a service center Lens is smudged or dirty Clean the lens Symptom Causes Remedy Focus mode is not correctSelect macro shot mode Use auto focus mode Adapter connection Exposure is excessive Reset exposure compensationCheck the connection cables Connected properly with Camera Voice Memo on Still Image max sec SpecificationsReal image optical viewfinder Voice Recording max hour Image Size Large Specifications are subject to change without prior noticePhoto Super fine 14, Fine 29, Normal 43, Tiff System Requirements Software Notes About the software Setting up the application software 111 112 Select Components window will appear. Click Next button 114 115 Removing the USB Driver for Windows 98SE Unplug or Eject Hardware icon on the task bar Removable Disk Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MAC Using PhotoImpression Digimax Viewer Digimax Viewer functions are listed below Basic functions Digimax ViewerProperty Check the USB port in your computer or keyboard Install the camera driver correctlyUpdate Driver or Reinstall Driver Case When using the USB hub Beside them or devices with an exclamation mark! beside them Are Unknown Devices or Other Devices 125 Memo 127 FAX 33 FAX 82 31-740-8398FAX 1 TEL 49 6196 66 53 FAX 49 6196 66 53