Connecting & Setting Up

Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on

HDD & DVD RECORDER and COMPONENT IN(Y,PB,PR) jacks on your TV.

•You will enjoy high quality and accurate colour reproduction images.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier).

(See pages 22~23).

3.After connecting, refer to the pages 41~43.

Other type of connecting the Audio output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

•Case 1 : Connecting to your TV

•Case 2 : Connecting to a stereo amplifier with AV output jacks

•Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

green

blue

red

red

blue

green

Case 1 : Connecting to your TV

If your TV has audio input jacks, use this connection.

 

■ Make sure that the colour coded connections

 

match. The Y, PB, PR component output jacks

 

NOTE

of your HDD & DVD RECORDER must be

 

 

connected to the exact corresponding

 

component input jacks on your TV.

■Progressive setting is only available when the Video Out is set to Component. (See pages 41~43)

22 - English

yellow

white

red

red

white

yellow