ENGLISH

Using the battery pack

Important!

When inserting the battery pack, make sure that it is inserted correctly. Otherwise, your DVD player may malfunction.

Charging the battery pack

Use the AC adapter (included) to charge the battery pack.

Before charging, make sure that the battery pack is correctly seated. 1. Connect the AC cord to the jack on the AC adapter ( 1 ).

2. Connect the DC cord to the DC IN jack on the left side of the DVD player ( 2 ).

3. Plug the other end of the AC cord into an AC outlet ( 3 ).

2

Blinking time

Charging rate

Once per second

Less than 50%

Twice per second

50%~75%

Three times per second

75%~90%

 

 

Blinking stops and stays on

90%~100%

 

 

On for a second and

Error-Reset the battery pack and

off for a second

the DC cable

13

Power Charge Lamp

-Green light will flash while charging.

-When the battery pack is fully charged, the light will stop blinking and remains green.

26

Page 27
Image 27
Samsung DVD-L1200 manual Using the battery pack, Charging the battery pack, Blinking time Charging rate, Power Charge Lamp