56_ recording
recording

RECORDING IMMEDIATELY

KLXCV
Before you start
Make sure the antenna cable is connected.
Press the OPEN/CLOSE button and place a recordable disc on the disc tray.
Check the remaining time on the disc.
DVD-RAM/DVD±RW/+R discs should be formatted or initialized in advance before beginning recording. Most new discs
are sold unformatted. Make sure to format your unformatted discs before recording.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.

Recording the current program you are watching

Press the CH (,/.) buttons or number buttons to select the
station you want to record.
Press the REC MODE button repeatedly, to select the recording
Speed (quality).
→ HQ → HSP → SP → LSP → ESP → LP → EP → SLP
Press the REC button.

Recording from external equipment you are watching

Power on your DVD Recorder and switch to AV IN mode by pressing the INPUT SEL. button on the
remort control.
→ AV1 → AV2 → DV → CH
Press the REC MODE button repeatedly to select the recording Speed (quality).
→ HQ → HSP → SP → LSP → ESP → LP → EP → SLP
When your DVD Recorder is in the Stop mode, set the operation mode of your external devices to play
mode.
Press the REC button on your DVD Recorder when the image from which you want to start recording is
displayed.
To pause recording
Press the PAUSE () button to pause a recording in progress.
Press the PAUSE () button again to resume recording.
You can switch channels by pressing the CH (,/.) buttons while recording pauses.
To stop recording
Press the STOP button to stop a recording in progress.
When using DVD-RAM/DVD±RW/±R discs, the message “Updating the information of disc.
Please wait for a moment.” is displayed.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
•
•
•
VR SP AV 1
DVD
-RW
DVD-R175-ENG.indb 56DVD-R175-ENG.indb 56 2008-06-18 오후 5:42:182008-06-18 오후 5:42:18