Samsung DVD-V642K, DVD-V645K Recording a Programme Immediately, Protecting a Recorded Cassette

Recording a Programme

Immediately

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select the recording speed by pressing the SPEED button as many times as required (see page 11).

5Hold REC (●) down for a while to start recording. Result: The record indicator appears on the

television and DVD-VCR display. An index is recorded on the tape (see page 15).

6To stop recording, press ■ once.

➢◆ If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.

◆If you reach the end of the tape while recording, the cassette rewinds automatically.

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of programmes.

Your DVD-VCR stops automatically after the requested length of time.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The DVD-VCR is switched on automatically.

4Select the recording speed by pressing the SPEED button as many times as required. (see page 11)

5Hold the REC button (●) down for a while to start recording.

Result: The record indicator appears on the television screen and DVD-VCR display. An index is recorded on the tape.

(see page 15)

6Press the REC button (●) several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD-VCR stops recording automatically and power off.

7If you wish to cancel the recording before the end, press STANDBY/ON.

☛If the end of the tape is reached while recording:

◆The recording stops and power off.

LENGTH 2:30

SET LENGTH :

PRESS REC ●

ENG-12