Samsung DVD-VR335/EUR, DVD-VR330/XEE AV1TV By means of 21-pin Scart Cable, By means of RF Cable

Connections

❚Case 2 : Connecting DVD Recorder & VCR to a Satellite Receiver or Other Equipment

You can connect your DVD Recorder & VCR to a Satellite receiver or other DVD Recorder & VCR using the SCART cable if the appropriate outputs are available on the equipment chosen.

The following illustrations give a few examples of the connection possibilities.

1	AV1(TV): By means of 21-pin Scart Cable
	Plug the SCART Cable with satellite receiver or
	other equipment into the AV1(TV) jack on the rear
	of the DVD Recorder & VCR.
	After making this connection, select the source by
	pressing the INPUT SEL.	button for the AV1 input
	sources.
2	By means of RF Cable
	After making this connection, you must preset the
	station received through the satellite tuner.
	RF output channel of the satellite receiver should
	be adjusted away from channel 36, which is used
	by the DVD Recorder & VCR, e.g. re-adjust to
	channel 33.

1

2

3

AV2 IN (EXT): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV2 (EXT) jack on the rear of the DVD Recorder & VCR.

After making this connection, select the source by

pressing the INPUT SEL. button for the AV2 input sources.

By means of RF Cable

After making this connection, you must preset the station received through the satellite tuner.

RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the DVD Recorder & VCR, e.g. re-adjust to channel 33.

AV1 (TV) : By means of 21-pin Scart Cable

Connect the end of the SCART cable to the AV1 (TV) jack on the rear of the DVD Recorder & VCR. Plug the other end into the appropriate connector on the television.

18 - English