Samsung DVD-VR331/EUR TV Aspect, 3D Noise Reduction Motion adaptive noise reduction, Video Output

Setting Up the Display (Video) Options

This function allows you to setup the TV screen settings.

1	With the unit in Stop mode/No Disc mode, press
	the MENU		button.
2	Press the …† buttons to select Setup						, then press
	the OK or √ button.
		DVD-Recorder				Setup
		No Disc
		Programme		System		√
		Setup		Clock Set		√
				Language		√
				Audio		√
				Video		√
				Parental Control		√
				Install		√
		MOVE		OK	RETURN	EXIT
3	Press the …† buttons to select Video						, then press
	the OK or √ button.
	Video option menu will be displayed.
		DVD-Recorder				Video
		No Disc
		Programme
				TV Aspect	: 16:9 Wide	√
		Setup		3D Noise Reduction	: Off	√
				Video Output	: Component	√
				DivX(R) Registration		√
		MOVE		OK	RETURN	EXIT
	Press the …† buttons to select the desired video
4 option, then press the OK					or √ button.

5 Press the …† buttons to select the desired item, then press the OK or √ button.

Press the RETURN or œ button to return to the

Note previous menu. Press the MENU button to exit the menu.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)

•4:3 Letter Box : Select this when you want to see all the 16:9 ratio picture from the DVD, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

•4:3 Pan - Scan : Select this for conventional size TV when you want to see the cen- tral portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

•16:9 Wide : You can view the full 16:9 picture on your wide-screen TV.

3D Noise Reduction

(motion adaptive noise reduction)

•Off : Normal

•On : Provides a clear picture through noise reduction (for recording).

	This function depends on disc type. It may not
Note	work for some disc types.

Video Output

You can enjoy high quality image through RGB or Component video connection.

• Component : Select this when the Recorder is connected to a TV with Component jack.

•RGB : Select this when the Recorder is connected to a TV using SCART cable.

In Component mode, you can set video output to Progressive (P.SCAN) or Interlace, see page 39~40.

Available video output jacks are as follow.

Available Video Output Jack

Output jack	Setting mode	Component mode		RGB Mode
		P.SCAN off mode (Interlace mode)	P.SCAN on mode
Component Output		O	O	X
(Y, PB, PR)			(TV in progressive mode)
AV1 Scart	R, G, B	X	X	O
	Composite	O	O	X
Composite Video out		O	O	O
S-Video out		O	O	O

English - 33

System Setup