Samsung DVD-VR330/XEE, DVD-VR331/EUR, DVD-VR335/EUR Options, Digital Output, Dynamic Compression

Setting Up the Audio

Options

Allows you to setup the audio device and sound status settings depending on the audio system in use.

You can also adjust the NICAM mode.

1		With the unit in Stop mode/No Disc mode, press
		the MENU		button.
2		Press the …† buttons to select Setup							, then press
		the OK or √ button.
Setup
			DVD-Recorder		Clock Set			√
								Setup
				No Disc
				Programme	System			√
ystemS				Setup
					Language			√
					Audio			√
					Video			√
					Parental	Control		√
					Install			√
				MOVE		OK	RETURN	EXIT
3		Press the …† buttons to select Audio							, then press
		the OK		or √ button.
		Audio setup menu will be displayed.
			DVD-Recorder					Audio
				No Disc
				Programme
					Digital Output		: PCM	√
				Setup	DTS		: Off	√
					Dynamic Compressiom		: On	√
					NICAM		: On	√
				MOVE		OK	RETURN	EXIT
		Press the …† buttons to select the desired audio
	4option, then press the OK or √ button.
		Press the …† buttons to select the desired item,
	5 then press the OK					or √ button.

■Press the RETURN or œ button to return to the

Note	previous menu. Press the MENU	button to exit
	the menu.

32 - English

Digital Output

• PCM	:		Converts to PCM (2CH) 48kHz
			audio. Select PCM when using the
			Analog Audio Outputs.
• Bitstream		:	Converts to Dolby Digital Bitstream.
			Select Bitstream when using the
			Digital Audio Output.

	Be sure to select the correct Digital Output or
Note	no audio will be heard.

DTS

•Off : Doesn’t output digital signal.

•On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.

	When DTS soundtrack is played, sound is not
Note	output from Analog Audio Output.

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

•Off : You can enjoy the movie with the standard Dynamic Range.

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language).

NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound.

•On : NICAM mode

•Off : Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.