Samsung DVD-VR370/EDC manual Audio DRC Dynamic Range Control DVDs only, Audio Hdmi DVD-VR375 only

system setup

Audio DRC (Dynamic Range Control) (DVDs only)

Makes the sound clearer when the volume is turned down when playing a DVD that conforms to Audio DRC.

•Standard : Normal setting

•TV Mode : Makes low sounds clear even if you turn the volume down.

•Wide Range : Gives you the feeling of being at a live performance.

Audio			12:00
Title List	Digital Out	: On
Timer	Downmix	: Dolby Surround
	Audio DRC	✔: Standard
Edit	Scan Audio	: OnTV Mode
	Surround	Wide Range
Dubbing		: Off
	AV Audio Input	: Stereo
Disc
Setting
Setup
> Move	sOk	rReturn	eExit

Audio (HDMI) (DVD-VR375 only)

Selets the output method from the HDMI OUT jack.

•Auto : Normal setting. Outputs audio signals according to the status of the connected HDMI device. If the HDMI OUT jack is connected to equipment not compatible with Dolby Digital, PCM will automatically be output, even when “Dolby Digital” is selected.

•PCM : Converts all audio signals to Linear PCM.

Audio			12:00
Title List	Digital Out	: On
Timer	Downmix	: Dolby Surround
	Audio DRC	: Standard
Edit	Audio(HDMI)	✔ Auto
Dubbing	Scan Audio	PCM
	Surround	: Off
Disc
	DV Audio Input	: Stereo1
Setting
Setup	AV Audio Input	: Stereo
> Move	sOk	rReturn	eExit

Scan Audio (DVDs only)

•On : Outputs audio signals during FF1 fast-forward of a DVD disc with Dolby Digital soundtracks.

•Off : Turns off the function. No sound is output during FF1 fast-forward.

M Sound will be interrupted during Scan Audio.

 If the audio format is LPCM, this function is not supported.

Audio			12:00
Title List	Digital Out	: On
Timer	Downmix	: Dolby Surround
	Audio DRC	: Standard
Edit	Scan Audio	✔ On
Dubbing	Surround	Off
	AV Audio Input	: Stereo
Disc
Setting
Setup
> Move	sOk	rReturn	eExit

Surround

Turns on the surround function to create virtual rear speakers from a stereo TV or two separate front speakers.

•Off : No surround effect

•Surround 1 : Creates one set of virtual surround speakers.

•Surround 2 : Creates two sets of virtual surround speakers.

•Surround 3 : Creates three sets of virtual surround speakers.

M When the playback signal does not contain surround audio signals, the surround effects will not be heard.

When you select one of the surround modes, turn off the surround settings of the connected TV or amplifier (receiver).

Audio			12:00
Title List	Digital Out	: On
Timer	Downmix	: Dolby Surround
	Audio DRC	: Standard
Edit	Scan Audio	: On
Dubbing	Surround	✔: Offf
	AV Audio Input	: SteSurround1eo
Disc
		Surround2
Setting
Setup		Surround3
> Move	sOk	rReturn	eExit

36_ system setup