7. Turn the power off by pressing the STANDBY/ON button to |
| Timer - Standard |
|
|
|
| 12:00 | ||||
activate the timer list setting. | No. |
| Media |
| Date | Start | End | Prog. Mode | PDC | Edit | |
|
|
|
|
|
|
|
|
|
| /VPS |
|
8. Refer to pages 63~64 if you want to | 01 |
|
| ► | |||||||
02 |
| No.01 |
|
|
|
|
|
| ► | ||
- Check whether the timer Recording has set correctly or not. |
|
| |||||||||
03 |
| Media | Date | Start | End Prog. Mode | PDC | ► | ||||
- Cancel a preset recording. |
|
| |||||||||
04 |
| DVD | Today 12 : 00 12 : 11 Prog. 1 | SP Off | ► | ||||||
|
| ||||||||||
| 05 |
|
| ► | |||||||
|
|
|
| ShowView |
|
|
|
|
|
| |
| 06 |
|
| ► | |||||||
M The numbers next to each TV programme listing in the magazines or | > Adjust |
| <Move |
| rReturn |
| eExit | ||||
newspapers are ShowView code numbers, which allow you to |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
programme your DVD Recorder & VCR. instantly with the remote control. Enter the ShowView code for the |
|
| |||||||||
programme you wish to record. |
|
|
|
|
|
|
|
|
|
|
|
ShowView is a trademark of Gemstar Development Corporation.
The ShowView system is manufactured under licence from Gemstar Development Corporation.
BASIC VCR RECORDING
Before starting
1.Check TV channel and Antenna connections.
2.Check the remaining time on the tape.
You can record a TV show in progress by inserting a blank tape and pressing the (REC) button. You can even add time in preset increments up to 6 hours by pressing the (REC) button repeatedly.
M Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape.
J Warning : Do not cover this opening unless you are sure you want to record over the tape.
1.Insert a blank VHS tape into the VCR deck.
•Make sure the tape is long enough to record the entire programme.
2.Press the Number buttons or the PROG/TRK (,/.) buttons to select the desired channel. Press the INPUT SEL. button to select Prog.1, AV1, AV2, AV3 or DV input
3.Press the REC SPEED button on the remote control to set the Record Speed to one of the following options:
•SP – Standard Play, for best picture quality.
•LP – Long Play, for maximum recording time (2 times SP).
M The selected Record Speed will appear on the front panel display and
Maximum Recording Time - SP vs. LP
Tape Length | SP (Standard Play) | Recording Times Data Rates |
|
|
|
E180 | Approx. 3 hrs | Approx. 6 hrs |
E240 | Approx. 4 hrs | Approx. 8 hrs |
E260 | Approx. 4 hrs 40 mins | Approx. 9 hrs 20 mins |
E300 | Approx. 5 hrs | Approx. 10 hrs |
|
|
|
RECORDING ●
English _65