RECORDING IMMEDIATELY

XCVKL

DVD-VR375 only

Before you start

1.Make sure antenna cable is connected.

DVD

VR

SP

AV 1

-RW

2.Press the OPEN/CLOSE button and place a recordable disc on the disc tray.

3.Check the remaining time on the disc.

DVD-RAM/DVD±RW/+R discs should be formatted or initialised in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

4.Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.

Recording the current programme you are watching

1.Press the PROG/TRK (,/.) buttons or number buttons to select the station you want to record.

2.Press the REC SPEED button repeatedly, to select the recording Speed (quality).

→ HQ → HSP → SP → LSP → ESP → LP → EP → SLP

3.Press the REC button.

Recording from external equipment you are watching

1.Power on your DVD Recorder & VCR and switch to AV mode by pressing the INPUT SEL. button on the remote control. The front panel display changes in the following sequence.

→PR → AV1 → AV2 → AV3 → DV (DVD-VR375 only)

2.Press the REC SPEED button repeatedly to select the recording Speed (quality).

→HQ → HSP → SP → LSP → ESP → LP → EP → SLP

3.When your DVD Recorder & VCR is in the Stop mode, set the operation mode of your external devices to play mode.

4.Press the REC button on your DVD Recorder & VCR when the image from which you want to start recording is displayed.

To stop recording

Press the STOP button to stop a recording in progress.

•When using DVD-RAM/DVD±RW/±R discs, the message “Updating the information of disc. Please wait for a moment.” is displayed.

RECORDING ●

English _59