+/- button
Using the Custom White Balance
1.Select the CUSTOM ( 
) menu of the White Balance.
2.Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button.
3.Your custom white balance value is stored.
-The custom white balance value will be applied, starting with the next picture you take.
-The user configured white balance will be remain effective until it is overwritten.
Mesure:Shutter |
Long Time shutter : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference.
Adjusting the shutter speed and aperture values
1.Select the [Night] scene mode.
2.Press +/- button and Long Time shutter menu (LT, For selecting shutter speed
and aperture value) will be displayed.
3. Configure the Long Time shutter value with the up/ down/ left/ right button.
[ White paper ]
Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the +/- button.
Compensating Exposure
1. Press the +/- button, and then use the UP and DOWN |
|
|
|
|
|
|
| ||
buttons to select the exposure compensation icon ( |
|
| ). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Use the LEFT and RIGHT buttons to set the desired |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
exposure compensation factor. |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
3. Press the +/- button again. The value you set will be |
|
|
|
|
|
|
| ||
saved and the Exposure Compensation setup mode |
|
|
|
|
|
|
| ||
will close. If you change the exposure value, the exposure indicator ( |
|
| ) will | ||||||
|
| ||||||||
be displayed on the bottom of the LCD monitor. |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
4. Press the +/- button again. The value you set will be saved and the mode will switch to NIGHT SCENE mode.
AUTO, WIDE : F3.5 ~ F6.3, |
| Aperture Value |
| ||
|
| |
TELE : F4.5 ~ F8.0 |
| Shutter Speed |
AUTO,1~16S
25
