Continuous shot
Select the number of pictures in continuous shooting.
- Single | : Take one picture only |
- Continuous | : Images will be taken continuously |
| until the shutter button is released. |
| The shooting capacity depends on |
| the memory. |
High resolution and picture quality increases file saving time, which increases
SHOOTING |
Single |
Continuous |
OSD(On Screen Display) information
In any mode with the exception of VOICE RECORDING mode, you can check the recording
status in the LCD monitor. Idle mode : If you select the [Save Mode] and the
camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor :
OFF, Camera status lamp : Blinking) automatically.
-To use the camera again, press any of the camera buttons except the power button.
-If there is no operation during the specified time, the camera power will be turned off automatically to save battery life. Refer to page 54 for more information about the auto power off function.
Sharpness
You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory.
Full OSD |
Basic OSD |
LCD Save |
- Soft | : The edges of the image are softened. |
| This effect is suitable for editing images |
| on your PC. |
- Normal | : The edges of the image are sharp. |
| This is suitable for printing. |
- Vivid | : The edges of the image are emphasized. |
| The edges will appear sharp, but noise |
| may occur in the recorded image. |
SHARPNESS |
Soft |
Normal |
Vivid |
34
