Setup menu
[ Connecting an External Device (USB) ]
■You can select an external device to which you want to connect the camera using the USB cable.
[ Selecting Video out type ]
■The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
●Sub menus
-[Computer] : Select this if you want to connect the camera to your PC. Refer to page 77 for instructions on how to connect the
camera to your PC.
- [Printer] : Select this if you want to connect the
camera to your printer.
Refer to page 57 for instructions on how to connect the camera to your printer.
| SETUP |
AF Lamp |
|
Sound | Computer |
USB | Printer |
LCD |
|
Video Out |
|
Back: | Set:OK |
■Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the AV cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically.
| SETUP |
USB |
|
LCD | NTSC |
Video Out | PAL |
Quick View |
|
Reset |
|
Back: | Set:OK |
[ LCD brightness ]
■You can adjust the LCD brightness.
●[LCD] sub menu : Dark, Normal, Bright
| SETUP |
Sound | Dark |
USB | Normal |
LCD | Bright |
Video Out |
|
Quick View |
|
Back: | Set:OK |
Yellow - Video White - sound
《65》
