| +/ - button |
|
|
| ||
■ White balance : The white balance control allows you to adjust the colours to | ● Using the Custom White Balance |
| ||||
| appear more natural. | White balance settings may vary slightly depending on the shooting | ||||
● Selecting a White Balance | environment. You can select the most appropriate white balance setting for a | |||||
given shooting environment by setting up the custom white balance. | ||||||
1. Press the +/ - button, and then use the UP and | ||||||
|
|
| ||||
DOWN buttons to select the white balance icon | 1. Select the CUSTOM ( | ) menu of the White |
| |||
( | ). The white balance menu bar will appear |
| ||||
Balance. |
|
| ||||
as shown. |
|
|
| |||
| 2. Place a sheet of white paper in front of the |
| ||||
2. Use the LEFT and RIGHT buttons to set the white |
| |||||
camera so that the LCD monitor shows only |
| |||||
balance to the desired value. The value you set wil |
| |||||
white, and then press the SHUTTER button. |
| |||||
be displayed on the LCD monitor. | Measure:Shutter | |||||
3. Your custom white balance value is stored. |
| |||||
AUTO | : The camera automatically selects the appropriate white |
| ||||
- The custom white balance value will be applied, |
| |||||
|
| balance settings, depending on the prevailing lighting |
| |||
|
| starting with the next picture you take. |
| |||
|
| conditions. |
| |||
|
| - The user configured white balance will be |
| |||
DAYLIGHT | : For taking images outside. |
| ||||
remain effective until it is overwritten. |
| |||||
CLOUDY | : For taking images under a cloudy and overcast sky. |
| ||||
|
|
| ||||
Fluorescent H | : For shooting under daylight fluorescent types of three- |
|
|
| ||
|
| way fluorescent lighting. |
|
| [White paper] | |
Fluorescent L | : Shooting under white fluorescent lighting. |
|
|
| ||
TUNGSTEN | : For shooting under tungsten (standard light bulb) |
|
|
| ||
|
| lighting. |
|
|
| |
CUSTOM | : Allows the user to set the white balance according to |
|
|
| ||
|
| the shooting condition. |
|
|
| |
Different lighting conditions may cause a colour cast on your images. |
|
|
| |||
3.Press the +/ - button again. The value you set will be saved and White Balance setup mode will end.
《33》
