Shooting in the dark

Option Description

Red-eye*:

￿￿The flash fires when the subject or background is dark.

￿￿The camera reduces red-eyes.

Fill in:

￿￿ The flash always fires.

￿￿Light intensity is adjusted automatically.

Slow Sync:

￿￿The flash fires and the shutter stays open longer.

￿￿ Select this when you want to capture ambient light to reveal more details in the background.

￿￿Use a tripod to prevent your photos from blurring.

Red-eye Fix*:

￿￿The flash fires when the subject or background is

dark.

￿￿The camera corrects red-eyes through its advanced software analysis.

The options may differ depending on the shooting mode.

*There is an interval between two bursts of the flash. Do not move until the flash fires a second time.

￿￿Flash options are not available if you set burst options or select Blink Detection.

￿￿Make sure that your subjects are within the recommended distance from the flash. (p. 102)

￿￿If there is reflected light or much dust in the air, tiny spots may appear on your photo.

Adjusting the ISO speed p

The ISO speed is the measure of a film’s sensitivity to light as defined by the International Organisation for Standardisation (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the flash.

1

In Shooting mode, select f ￿

 

.

 

 

2

Select an option.

 

 

￿￿Select to use an appropriate ISO speed based on the brightness of the subject and lighting.

Auto

The higher ISO speed you select, the more image noise you may get.

Shooting options 45