FAQ

When the movie clip doesn’t play back on the PC

When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly codec installed on the PC.

When A codec for play back the movie clip isn’t installedInstall the codec as listed below.[Installing a codec for Windows]1)Insert the CD provided with the camera

2)Run the windows explorer and select [CD-ROM drive:\Xvid] folder and click the Xvid- 1.0.2.exe file.

[Installing a codec for Mac OS]

1)Visit the following site for downloading the codec.http://www.divx.com/divx/mac

2)Click the [Free Download] button located upper right side of the page and a window for downloading the DivX codec will display.

3)Select Mac OS you use and click the [Download] button. Save it on a folder you want to.

4)Run the downloaded file and the codec for playing back the movie clip will be installed.

When the DirectX 8.1 or later is not installedInstall the DirectX 8.1 or later

1)Insert the CD provided with the camera

2)Run the windows explorer and select [CD-ROM drive:\ USB Driver\DirectX 8.1] folder and click the DXESETUP.exe file.The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.com/directx

If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly

If a PC (Windows 98) is turned on for a long time and connect the camera repeatedly, the PC may not recognise the camera. In this case, re-start the PC.

131