S3F8275X/F8278X/F8274X FLASH MCU S3C8275X/F8275X/C8278X/F8278X/C8274X/F8274X
19-4
Table 19-1. Descriptions of Pins Used to Read/Write the Flash ROM
Main Chip During Programming
Pin Name Pin Name Pin No. I/O Function
VLC1 SDAT 7 I/O Serial data pin. Output port when reading and
input port when writing. Can be assigned as an
Input or push-pull output port.
VLC2 SCLK 8 I/O Serial clock pin. Input only pin.
TEST VPP 13 I S3F8278X/F8274X: Power supply pin for Flash
ROM cell reading/writing. 12.5V is applied in
Flash writing mode and 3.3V is applied in Flash
reading mode.
S3F8275X: Power supply pin for Flash ROM cell
reading/writing. 3.3V is applied in Flash
reading/writing mode because internal block
makes 12.5V. So, TEST pin must be connected
to VDD.
nRESET nRESET 16 I Chip initialization
VDD/VSS V
DD/VSS 9 / 10 I Power supply pin for logic circuit.
VDD should be tied to +3.3 V during
programming.
Table 19-2. Comparison of S3F8275X/F8278X/F8274X and S3C8275X/C8278X/C8274X Features
Characteristic S3F8275X/F8278X/F8274X S3C8275X/C8278X/C8274X
Program memory 16/8/4-Kbyte Flash ROM 16/8/4-Kbyte mask ROM
Operating voltage (VDD) 2.0 V to 3.6 V 2.0 V to 3.6 V
Flash ROM programming mode VDD = 3.3 V, VPP(TEST)=12.5V
Pin configuration 64-QFP, 64-LQFP 64-QFP, 64-LQFP
Flash ROM programmability User Program multi time Programmed at the factory
NOTE: The VPP (Test) pin must be connected to VDD (S3F8275X only).