S3F8275X/F8278X/F8274X FLASH MCU S3C8275X/F8275X/C8278X/F8278X/C8274X/F8274X
19-6
Table 19-4. D.C. Electrical Characteristics
(TA = − 25°C to + 85
°C, VDD = 2.0 V to 3.6 V)
Parameter Symbol Conditions Min Typ Max Unit
Supply current (1) I
DD1 (2) 8.0 MHz
− 3.0 6.0 mA
Run mode:
VDD = 3.3 V ± 0.3 V
Crystal oscillator
C1 = C2 = 22pF 4.0 MHz 1.5 3.0
IDD2 (2) 8.0 MHz 0.5 1.6
Idle mode:
VDD = 3.3 V ± 0.3 V
Crystal oscillator
C1 = C2 = 22pF
4.0 MHz 0.4 1.2
IDD3 (3) Run mode: VDD = 3.3 V ± 0.3 V,
32 kHz crystal oscillator
TA = 25 °C, OSCCON.7=1
12.0 25.0 µA
IDD4 (3) Idle mode: VDD = 3.3 V ± 0.3 V
32 kHz crystal oscillator
TA = 25 °C, OSCCON.7=1
2.0 4.0
IDD5 (4) Stop mode;
VDD = 3.3V ± 0.3 V TA = 25 °C 0.2 2.0
TA = −25 °C ~ +85 °C − 10
NOTES:
1. Supply current does not include current drawn through internal pull-up resistors, LCD voltage dividing resistors, the LVR
block and external output current loads.
2. IDD1 and IDD2 include power consumption for sub clock oscillation.
3. IDD3 and IDD4 are current when main clock oscillation stops and the sub clock is used (OSCCON.7=1).
4. IDD5 is current when main clock and sub clock oscillation stops.
5. Every values in this table is measured when bits 4-3 of the system clock control register (CLKCON.4-.3) is set to 11B.