O p e r a t i o n
Memorizing the Channels
Your TV can memorize and store all of the available channels for both 
and CH
buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding/deleting channels (manual).
Selecting the Video Signal Source
Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or cable system).
1 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.
Input
Picture
Sound
Channel
Setup
Channel
Antenna | : Ant.1 | √ |
Air/CATV | : Air | √ |
Auto Program |
| √ |
Add/Delete |
| √ |
Favorite Channels | √ | |
Name |
| √ |
Fine Tune |
| √ |
▼ More |
|
|
Move | Enter | Return |
2 Press the … or † button to select “Air/CATV”, then press the ENTER button.
If you are connected to an antenna, press the … or † button to select “Air”.
If you connected cable, press the … or † button to select the type of cable system: “STD”, “HRC” or “IRC”.
Press the EXIT button to exit.
| Channel |
| |
Input | Antenna | Air | |
| Air/CATV | STD | |
Picture | Auto Program | HRC | |
IRC | |||
| Add/Delete | ||
Sound | Favorite Channels |
| |
| Name |
| |
Channel | Fine Tune |
| |
Setup | ▼ More |
| |
|
|
Move 
Enter 
Return
NOTES
•“STD”, “HRC” and “IRC” identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”.
•Subscription cable services require
English - 26
