Storing Channels in Memory (Automatic Method)
First, select the correct signal source (“Air”, “STD”, “HRC” or “IRC”) as described on the previous page.
1 Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER button.
2 Press the … or † button to select “Auto Program”, then press the ENTER button. Press the ENTER button to start the auto program.
The TV begins memorizing all of the available stations.
Press the ENTER button at any time to interrupt the memorization process.
Press the EXIT button to exit.
Channel
Input | Antenna | : Ant.1 | √ | |
| Air/CATV | : Air | √ | |
Picture | Auto Program |
| √ | |
| Add/Delete |
| √ | |
Sound | Favorite Channels | √ | ||
| Name |
| √ | |
Channel | Fine Tune |
| √ | |
Setup | ▼ More |
|
| |
Move | Enter | Return | ||
| ||||
Auto Program
Start
Enter 
Return
Adding and Erasing Channels
You can add channels that were not memorized or delete unwanted channels from memory.
1 Press the MENU button.
Press the … or † button to select
“Channel”, then press the ENTER button.
2 Press the … or † button to select “Add/Delete”, then press the ENTER button.
Repeatedly pressing the ENTER button will alternate between add channel and delete channel.
Press the CH
or CH
button to switch to the appropriate channel, then repeat above.
Press the EXIT button to exit.
Channel
Input | Antenna | : Ant.1 | √ | |
| Air/CATV | : Air | √ | |
Picture | Auto Program |
| √ | |
| Add/Delete |
| √ | |
Sound | Favorite Channels | √ | ||
| Name |
| √ | |
Channel | Fine Tune |
| √ | |
Setup | ▼ More |
|
| |
Move | Enter | Return | ||
| ||||
Add/Delete
Air 12 Not In Memory
Add
Change | Enter | Return |
Alternate method
Simply press the ADD/DEL button on the remote control to add or delete channels.
English - 27
