Samsung HL-P5685W, HL-P5085W instruction manual Rear Panel Jacks, Antenna terminals

Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and three set of component video input jacks on the rear panel of your TV. For more information, please see “Connections”.

ΠANTENNA terminals

Two independent cables or antennas can be connected to these terminals. Use “ANT 1 IN” and “ANT 2 IN” terminals to receive a signal from VHF/UHF antennas or your cable system. Use the “ANT 1 OUT” terminal to send the signal being received by the “ANT 1 IN” terminal out to another component (such as a Cable Set-Top Box). The PIP channel can be received only when a signal source is connected to “ANT 1 IN”.

´S-VIDEO INPUT jacks

Connects an S-Video signal from an S-VHS VCR or DVD player.

ˇ VIDEO/AUDIO INPUT jacks (VCR1, VCR2)

Connect video/audio signals from external sources, such as VCR or DVD players.

¨VIDEO/AUDIO OUTPUT jacks

Sends a video signal from the TV to an external source, such as VCR.

Note: It is available only in RF, Video and S-Video modes.

ˆ Component1, 2 jacks (Y, PB, PR, L, R)

Use these jacks to connect the component video/audio signals from a DVD player or a set top box when using the component video input jacks.

Ø PC AUDIO INPUT jacks

Connect these to the audio output jacks on your PC.

∏ PC VIDEO INPUT jack

Connect these to the video output jack on your PC.

” DVI (Digital Video Interface) AUDIO INPUT jacks Connect to the digital audio output jacks of a device with DVI output.

’ DVI (Digital Video Interface) VIDEO INPUT jack Connect to the digital video output jack of a device with DVI output.

˝ HDMI (High Definition Multimedia Interface)

VIDEO/AUDIO INPUT jack

Connect to the HDMI jack of a device with HDMI output.

Ô SERVICE

This jack is for repair and software upgrades.

English - 9