Samsung HL-R5688W manual Possible Solution, Using the D-Net, Problem

Using the D-Net

Problem	Possible Solution
“Connection is failed.	This message appears when the connection speed of
1394 network speed is not	the connected device and the device selected from the
compatible.” message appears.	Target List are different when copying data.
	➔ Connect a low speed device between the two
		devices. (See figure)

	A 1394 device has a maximum connection
	speed which will be marked near the
	IEEE 1394 connector with an “S” number
	(i.e., S100,S200,S400). The higher the number,
	the faster the maximum connection speed.
	This TV has a maximum connection speed of S400.
“This device is occupied by another	This message appears when you try to record a
device.” message appears.	device, which is currently being recorded manually or
	by another device, through the TV.
	➔ Stop the recording device and retry.
“Authentication is failed” message	Check that the connected device supports DTCP.
appears.
“Recording is prevented.” message	This message appears when trying to copy protected
appears.	content.
Although DV Camcorder is in	Although a camcorder which supports the DV format
the device list, no picture is	appears in the device list, you cannot watch video
displayed on the screen when	from the camcorder even if you select the camcorder
the DV camcorder is selected.	as an input source, because the TV supports the
	MPEG format only.
	Continued...

English - 124