80
troubleshooting
Recording
Symptom Explanation/Solution
The recording stops
automatically.
There is no more free space for recording on the storage media.
Back up important fi les on your PC and format the storage media
or delete unnecessary fi les.
If you use a memory card with a low write speed, the camcorder
automatically stops recording videos and the corresponding
message appears on the LCD screen.
•
•
When recording a subject
illuminated by bright light, vertical
lines appear.
The camcorder is unable to record at these levels of brightness.
Record in an area that is not as bright.
•
When the screen is exposed to
direct sunlight during recording,
the screen turns red or black for
an instant.
This is not a malfunction. Do not expose the camcorder to direct
sunlight.
•
You don’t hear the beep sound. Set the "Beep Sound" to "On."¬page 59
The beep sound is temporally off while recording videos.
•
•
There is a time difference between
the point where you touch
Recording start ( ) /stop( )
tab and the point where the
recorded video starts/stops.
On your camcorder, there may be a slight time delay between
the time when you touch Recording start ( ) /stop( )
tab and the actual time when the recorded video starts/stops.
This is not an error.
•
You cannot record a photo.
Set your camcorder to Record mode. ¬page 23
The storage media is full. Use a new memory card or format the
storage media. ¬page 56
Or delete unnecessary images. ¬page 51
•
•