Samsung HMX-R10BP Analogue TV Out, Default Set, item, Submenu items, ) or Return ( ) tab, ) tab  “Analogue TV Out.”, 3.Set the date and time again. page

Analogue TV Out

You can set the component or composite video output to match the TV you have connected.

PRECHECK!

•Using the Component/AV Cable provided with your camcorder, connect the camcorder to your TV. page 119~123

•This HD camcorder provides the two-in-one component/AV cable that fits the purpose of the component and the AV cable. Therefore, when using the component/AV cable, you must check the right method for the TV output by setting the “Analogue TV Out” menu.

1.	Touch the Menu ( )  Setting (	) tab  “Analogue TV Out.”	MIN
			90
2. Touch a desired submenu item.			PC Software
	• Check the TV type, connection jack, and the resolution of
			USB Connect
	the recorded video before you choose the desired submenu
			TV Type
	item.	5 / 7
			Analogue TV Out
3.	To exit the menu, touch the Exit (	) or Return ( ) tab.

Submenu items

•Component Auto(): The video signals are output in the same format as the recorded file. Use this setting only when connecting to an HDTV.

•Component 576p(): The recorded file is output in the 720x576P format. Use this setting only when connecting to a regular TV which supports the progressive scan at the SD(Standard Definition) level by using the component(Y/Pb/Pr, AUDIO) jacks.

•Component 576i(): The recorded file is output in the 720x576i format. Use this setting only when connecting to a regular TV which only supports the SD(Standard Definition) resolution without the progressive scan by using the component(Y/Pb/Pr, AUDIO) jacks.

•Composite(): The composite video signals are output via the Component/AV cable (green). Use this setting only when connecting to a regular TV that has no component video jacks.

•The Analogue TV Out indicator is displayed only when the camcorder is connected to a TV.

•For details on TV specification, refer to the user manual of the connected TV.

•Although the “Analogue TV Out” is set to “Component 576p,” the component video signal is output as interlaced format if the resolution is set to [HD]1080/50i.

Default Set

You can restore all menu settings to the default conditions.

1.Touch the Menu ()  Setting () tab  “Default Set.”

•A message appears asking for your confirmation.2.Touch "Yes" if you want all the settings return to the default.•The Time Zone screen appears after all settings return to the default.3.Set the date and time again. page 35

•Do not turn off the power while using this function.

•Initializing the HD camcorder settings to factory defaults does not affect recorded images.

90 MIN

	TV Connect Guide
	TV Display
6 / 7	REC Lamp
	Default Set
		90
		MIN
	DefaultTV ConnectSet? Guide
	All settings return to default.
	TV Display
6 / 7	REYECSLamp	NO	105
	Default Set