connecting to a TV

Type B: Connecting a Component/AV cable for the composite output.

Nornal TV

Camcorder

DCIN

S-VIDEO IN VIDEO IN AUDIO IN

L R

Signal flow

Component/AV cable

Type B: Connecting a Component/AV cable for the composite output

1.Connect the provided component/AV cable to the Composite jack, “Video and L-R (Audio)” on TV. Use the Green plug with the yellow label to connect to the Video input on your TV.

•After the connection is complete, check the desired TV out method by setting “Analogue TV Out” to “Composite.” page 105

2.Turn on the TV and set the input selector to the Input connection your camcorder is connected to.

•This is often referred to as “line.”•Refer to the TV instruction manual for how to switch the TV input.

If the Pr, Pb, or Y jack receives the wrong direction from the connected cable, the TV screen appears in red or turn out to be blue screen.

•Check the connection status between the HD camcorder and TV, the TV screen may not deliver the right video information if connected in a wrong way.

•When the camcorder is connected to TV with more than one cable, the output signal is followed in the order of priority:

HDMI Component/AV output.

•Do not use excessive force when connecting the cables.

•For more information about the TV connection jack and the connecting method, refer to the TV user manual.

•Following method Type B above, the Green plug may not match the Video input on your TV due to the VIDEO input being labelled differently. Sometimes the TV set has a “Y” input jack instead of “VIDEO.”

122