Samsung HMX-R10BP VIEWING ON A TV SCREEN, 4:3, 4:3, 4:3, 16:9, 16:9, 16:9, Playback on a TV, • The TV jacks are connected with the right cables

VIEWING ON A TV SCREEN

You can enjoy the enjoy widescreen videos on a HDTV (or the normal TV) after recording videos using the HD camcorder.

1.You will find the video, being playback on TV if the connection status is set correct. page 119-122

• The TV jacks are connected with the right cables?• If the component/AV cable is used, “Analogue TV Out” is set correctly?• Input source list is correctly set to view the playback from the camcorder?2. Select the playback mode on your camcorder and start playback videos.•Use the same methods for the operation modes including the playback.

•This HD camcorder supports the Anynet+ function, therefore, you can use the same remote control for both devices if connected with HDMI cable to the Anynet+ support TV. page 112.

•Adjust the volume at the moderate level. If the volume is too high, the video information may include the noise.

•If the “TV Display” is set “Off,” TV screen does not include the OSD (On Screen Display) menus. page 104

•This camcorder does not support the audio output signal when the camcorder is connected with TV in the video or photo record mode. The audio output signal is supported as long as the camcorder is connected in the video playback mode. This is not an error.

Playback on a TV

•Images recorded on this camcorder are variously viewed depending on the aspect ratio of the connected TV and TV type setting on this camcorder. Set the appropriate screen ratio according to your TV.

		Recording ratio	TV Type setting	Wide (16:9) TV	4:3 TV
	Images recorded in a 16:9		16:9
	ratio
	•	Video Image
	•	Photo capture images	4:3
	•	Photo Image
	Images recorded in 4:3		16:9
	ratio
	•	Video Image
	•	Photo images	4:3
	•	Photo capture images
	Images in the Slow Motion		16:9
	mode
			4:3
						123
• Refer to page 104 for “TV Type” setting.