Samsung HMX-R10BP/MEA, HMX-R10BP/EDC manual Anynet+ HDMI-CEC, On Enables the Demo function

advanced operation: system setting

Demo

Demo mode automatically shows you the major functions that are included with your camcorder so that you may use them more easily.

1.Touch the Menu ( )  Setting ( ) tab  “Demo”  “On.”

•If you don't want this function, touch “Off.”

2.To exit the menu, touch the Exit () or Return () tab.

•The Demo function starts on the LCD screen.

Submenu items

•Off : Disable the function.

•On: Enables the Demo function.

Using the Demo function

•The Demo mode is cancelled in the following cases:

-If the LCD screen is touched.

-If any button is operated (Recording start/stop, Q.MENU, Display ( )/iCHECK, EASY Q, MODE, PHOTO, etc.) However, the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode if it is idle for 5 minutes without an operation. If you don’t want the Demo function starts, set “Demo” to “Off”.

•The Demo function does not operate in the following cases:

-If “Auto Power Off” is set to “5 Min”(uses the battery as main power), the Auto Power Off function will operate prior to Demo.

	90
	MIN
	Language
	Demo
7 / 7	Anynet+ (HDMI-CEC)
	Demo
	Off
	On
1 / 1
	HMX-R10

1080iFULL HD Video

9.0 Megapixel Photo

Anynet+ (HDMI-CEC)

This camcorder supports Anynet+. Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with an Anynet+ supported Samsung TV remote control.

1.Touch the Menu ()  Setting ( ) tab  “Anynet+ (HDMI-CEC).”

2.Touch a desired submenu item.

3.To exit the menu, touch the Exit () or Return () tab.

•When the camcorder is connected to the Anynet+ supported TV, you can operate some functions of the camcorder using the TV’s remote control.

	90
	MIN
	Language
	Demo
7 / 7	Anynet+ (HDMI-CEC)

Submenu items

•Off: Disable the function.

•On: The Anynet+ function is enabled.

•When you turn on the camcorder that is connected to an Anynet+ supporting TV with an HDMI cable, the TV (Anynet+ supported) is automatically turned on. If you do not want to use this Anynet+ function, set the “Anynet+ (HDMI-CEC)” to “Off.”

106• For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of Samsung’s Anynet+ supported TV.

Anynet+ (HDMI-CEC)

Off

On

1 / 1