Samsung HP-R4252C, HP-R5052C manual Memorizing the Channels, Channel, then press the Enter button

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable

channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting a broadcast source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1	Press the MENU button. Press the ▲ or ▼ button to select
	“Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Auto Program”, then

2 press the ENTER button.

Press the ▲ or ▼ button to select the antenna connection,

3 then press the ENTER button.

Notes

•	Air	: “Air” antenna signal.
• Cable		: “Cable” antenna signal.
•	Air + Cable	: “Air” and “Cable” antenna signals.

•If the antenna is connected to ANT 1 IN (CABLE IN), select “Cable” and if it is connected to ANT 2 IN (AIR IN), select “Air”.

•If both ANT 1 IN and ANT 2 IN are connected, select the “Air + Cable”.

T V		Channel
	Antenna	: Air	√
	Auto Program		√
	Add / Delete		√
	Favorite Channels		√
	Name		√
	Fine Tune		√
	† More

	Move	Enter	Return
T V		Channel
	Antenna	: Air	√
	Auto Program		√
	Add / Delete		√
	Favorite Channels		√
	Name		√
	Fine Tune		√

†More

Move	Enter	Return
T V	Auto Program
Select the antennas to memorize
Air	Start
Cable	Start
Air + Cable	Start

Move	Enter	Return
T V	Auto Program
Select the antennas to memorize
Air	Start
Cable	Start
Air + Cable	Start

Move Enter Return

37