Press the ▲ or ▼ button to memorize the channels of
3 the selected connection.
Press the ENTER button to select “Start”.
Notes
•If the antenna is connected to ANT 1 IN (CABLE IN), select “Cable” and if it is connected to ANT 2 IN (AIR IN), select “Air”.
•If both ANT 1 IN and ANT 2 IN are connected, select the “Air + Cable”.
Plug & Play
Select the antennas to memorize.
AirStart
CableStart
Air + Cable |
| Start |
Move | Enter | Skip |
Select the correct signal source (STD, HRC, and
4 IRC) by pressing the ▲ or ▼ button, then press the ENTER button.
Note
•STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory” on page 38.
The TV will begin memorizing all of the available
5 channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button at any time to interrupt the memorization process.
Press the ENTER button to select OK when channel memorization is complete.
“Set to daylight savings time.” menu is automatically displayed.
| Plug & Play |
|
Select the cable system. |
| |
STD |
|
|
HRC |
|
|
IRC |
|
|
Move | Enter | Skip |
Plug & Play
Auto Program in Progress.
Cable Channel 67
Stop
Enter 
Skip
Plug & Play
Auto Program is completed. 14 Channels were memorized. AIR : 9 , Cable : 5.
OK
Enter 
Skip
33
