Storing Channels in Memory
Select the correct signal source (STD, HRC, and
4 IRC) by pressing the ▲ or ▼ button, then press the ENTER button.
Note
•STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
The TV begins memorizing all available stations.
5 Press the ENTER button at any time to interrupt the memorization process.
Press the EXIT button to exit.
Note
•The TV must be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
T V | Auto Program |
Select the cable system.
STD
HRC
IRC
Move 
Enter 
Return
Auto Program
Auto Program in Progress.
Cable Channel 67
Stop
Enter 
Return
Notes
•All available DTV and analog channels are automatically stored in memory when channels are selected by directly accessing channels.
•It takes approximately 3 to 10 minutes to memorize channels.
38
