SYSTEM TONES

The system provides several tones to assist you. Some of these tones are already familiar to you.

Intercom Dial Tone—A steady tone that indicates you can begin dialing.

DIAL TONE

CONTINUOUS

LCD 24B KEYSET LAYOUT

LABELING PROGRAMMABLE KEYS

Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.

Ringback Tone—Indicates the station you dialed is ringing.

RINGBACK TONE—1000 ms ON/3000 ms OFF

CONTINUOUS

Busy Tone—Indicates the station you dialed is busy.

BUSY TONE—500 ms ON/500 ms OFF

CONTINUOUS

32 CHARACTER DISPLAY Two lines with 16 characters each.

SOFT KEYS Used to

SCROLL KEY Used to

activate features via

scroll through displays.

the display.

 

 

16 PROGRAMMABLE

 

KEYS WITH TRI-

 

COLORED LIGHTS

 

Used for CALL buttons,

 

intercom calls, outside

 

lines and many other

 

system features.

SCROLL

DND/No More Calls Tone—Fast busy tone indicates the station you dialed is in the Do Not Disturb mode or cannot receive any more calls.

DND/NO MORE CALLS TONE—250 ms ON/250 ms OFF

FOR TEN SECOND

Transfer/Conference Tone—Indicates your call is being held and you can dial another party.

TRANSFER/CONF TONE—100 ms ON/100 ms OFF

CONTINUOUS

Confirmation Tone—Very short beeps followed by dial tone indicate you have correctly set or canceled a system feature.

VOL

SPK

HOLD

TRSF

ANS/

RLS

1

2 ABC

3 DEF

4 GHI

5 JKL

6 MNO

7 PRS

8 TUV

9 WXY

 

0OPER

 

8PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, to in- dicate busy condi- tions of other sta- tions, for One Touch di- aling and many other system features.

VOLUME CONTROL KEYS Used to set independent levels for hand-

set, speaker, background music, ring and page volumes.

CONFIRMATION TONE—50 ms ON/50 ms OFF

FOR ONE SECOND (programmable)

SPEAKER For handsfree operation and ringing.

PULLOUT

MICROPHONE For handsfree operation.

Error Tone—A distinctive two level beeping tone indicates you have done something incorrectly. Try again.

ERROR TONE—50 ms of tone 1/50 ms of tone 2

FOR THREE SECO

ANSWER/RELEASE KEY

TRANSFER KEY

HOLD KEY

DIRECTORY TRAY

SPEAKER KEY Used to switch call to speakerphone.

4

5