Using Smart Station

3.Automatic installation may not be supported depending on your PC system settings.

If automatic installation does not work, run Windows Explorer. Open My Computer –

Removable media device drive and check the software. Finally, double-click the software to proceed with installation. Alternatively, install using the software program on the provided CD.

•Install using Explorer

A virtual installation driver will appear. Double-click the icon to install the program.

NOTE

•It may take a while for the virtual driver to appear.

•Do not remove the cable or turn off the product until install is complete.

•Install using the CD

Run the provided CD, then select the desired language.

Click SAMSUNG Smart Station to install the program manually.

NOTE

•Loading the install file may take a while.

•Do not remove the cable or turn off the product until install is complete.

4.After installation, make the required connections and use the product as instructed below.

-- For Series 5 users

Press the [] button on the front of the product to change Select Source to USB. Alternatively, press the [] button to change the input source to USB.

-- For Series 7 users: Disconnect the USB cable. Next, connect the wireless-connection dongle to a USB port on the PC.

Press the [] button on the front of the product to change Select Source to Wireless

Connection. Alternatively, press the [] button to change the input source to Wireless Connection.

NOTE

Wireless Connection is supported on Series 7 only.

22