Using Smart Station
Using Wireless Connection (Wireless Connection Manager)
Wireless Connection Manager is for Series 7 only.
The Wireless Connection Manager program allows you to connect your PC to the Smart Station monitor wirelessly.
To use a Wireless Connection, you must install the Wireless Connection Manager program. Have the program install automatically by connecting the provided USB cable during the initial setup (refer to page 21).
You can use the USB Hub feature as well as display the PC screen over a wireless connection without the need of a cable.
1.Connect your PC to the product using the USB cable provided in the package. Wireless Connection Manager will automatically install.
2.After the program is installed, remove the USB cable. Next, connect the provided wireless- connection dongle to a USB port on the PC.
3.Press the [ ] icon at the far right side of the taskbar to install Wireless Connection Manager.
4.Run Wireless Connection Manager. A list of monitors you can connect to will appear.
You can set the desired monitor as the primary monitor Set as default.
You can change the name of a monitor.
Auto Wireless Detection
If Auto Wireless Detection mode is enabled, the product will automatically connect or disconnect from the notebook PC when the notebook PC is moved closer or further away. Make your wireless connection experience even more convenient through Auto Wireless Detection.
1.Run Wireless Connection Manager.
2.
3.Press the [] button on the product. Next, set Auto Wireless Detection to On.
27